fbpx
  • Fobik Programming Instruction:

Programming When

Keys added or replaced.”FOBIK” Remotes (FOB Intregated Key)
How:

NOTE: Two programmed key transmitters must be available for the following procedure to operate.

  • Obtain all keys.
    Using first programmed key turn ignition switch ON and wait 3 seconds, return to OFFposition and remove key.
    NOTE: First and second programmed key operations MUST be performed within 15 seconds.
    Insert second programmed key and switch ignition ON.
    Wait approximately 10 seconds.
    Ensure immobilizer warning lamp begins to flash and an acoustic signal is emitted.
    Switch ignition OFF and remove key.
    Within 50 seconds, insert new key and switch ignition ON.
    Wait approximately 10 seconds.
    Ensure acoustic signal is emitted and immobilizer warning lamp remains illuminated for 3 seconds indicating programming completed.
    For each additional key repeat procedure starting from the beginning.
    Replacement keys can also be programmed using diagnostic equipment.
Amazon
Instagram
Facebook
Follow by Email
%d bloggers like this: